Front lights
Five precut films: three sections for the upper front light bar and two for the lower headlights. Choose this for front-only coverage.
2026 Tesla Model Y Juniper TPU Headlight & Taillight Film
$24.99 USD – $59.99 USD
$24.99 USD – $59.99 USD
Free standard shipping: U.S. $70+ · International $169+. Terms apply.
One-to-one customer support
Secure checkout
NUVEREN · Precut TPU light films
A sharper detail.
A considered finish.
Protect and personalize the light surfaces of your 2026 Tesla Model Y Juniper. Choose the coverage you need, then Clear, Smoked or Photochromic film.
01 · Your vehicle, resolved
Juniper fitment.
Without the guesswork.
This listing is for the refreshed Model Y with the slim front light bar, separate lower headlights and wraparound rear lamp surround. All four coverage options use this same vehicle fitment.
| North American vehicle | Choose this product? |
|---|---|
|
2026 Model Y Juniper Launch Series, Long Range / Premium RWD or AWD, Performance |
Yes — original Juniper light-bar assemblies. |
| 2026 Model Y Standard RWD / AWD | No — different factory lighting design. |
| Original Model Y, model years 2020–2025 | No — pre-refresh lamp shapes. |
| Model YL; Model 3, S or X | No — different cutting patterns. |
Bought your refreshed Model Y in 2025? Purchase date is not model year. North American Juniper vehicles are listed here under model year 2026; some international accessory listings call this design “2025+.” If your lights have been replaced with a different design, contact us before ordering.
02 · Choose coverage
The right surfaces.
Nothing left unclear.
Select one coverage option. The wide center rear trim panel is a separate surface from the rear lamp surround.
Rear lights
Shaped films for the rear lamp surround shown in the layout, including the narrow center section with its opening. The broad center trim panel is excluded.
Front + rear lights
Both light-film sets in one option. A simple choice when you want the same finish at the front and rear. The broad rear trim-panel film is still separate.
Rear trim panel only
One wide film for the center rear light-bar trim panel, with openings for the factory lettering. No front-light or rear-lamp films are included.
The product is precut adhesive film, not replacement lamps or a rigid trim panel. Film coverage follows the layout shown. Installation tools are not advertised as included.
03 · Choose the finish
Your look.
Three ways to get there.
| Finish | Choose it for | What to expect |
|---|---|---|
| Clear | The original untinted appearance. | A transparent surface layer. Our recommendation when retaining the factory look is your priority. |
| Smoked | A fixed, darker styling effect. | A smoky appearance that can reduce transmitted light. |
| Photochromic | A light-responsive styling effect. | Tint changes with light conditions. Appearance and response vary; no activation time or light-transmission percentage is specified. |
Images illustrate finish and coverage; they are not measured shade or light-output comparisons. Local rules govern films on lamps and reflectors, including clear covers.
04 · A flexible layer
Protection, shaped
around the detail.
Flexible TPU places a sacrificial layer over the selected surfaces to help take everyday surface contact. Precut shapes follow the Juniper design and reduce the need to trim on the vehicle.
Defined coverage
Choose the front, rear, both light sets or the independent rear trim film. Only the surfaces in the chosen pattern are covered.
Keep openings open
Position the center opening and all edges carefully. Film must not obstruct cameras, sensors, vents or gaps between components.
Film does not repair scratched or cracked lamps. No thickness, impact rating, self-healing performance or service-life figure is claimed for this listing.
05 · Before you install
A better result
starts with preparation.
- Clean and inspect. Work on cool, sound surfaces in a clean area. Remove dirt, wax and incompatible coating residue with a lens-safe cleaner.
- Align before peeling. Keep liners on while identifying left, right and center pieces. Check the opening positions and the boundaries of each surface.
- Use the correct application method. Follow the instructions for the supplied film and adhesive; do not improvise a solvent or slip-solution recipe. A professional PPF installer is recommended if you are new to precut light film.
- Inspect the result. Keep cameras unobstructed. Check lamp visibility, edges and trapped contamination. Avoid abrasives and pressure washing directly at film edges; follow the supplied curing guidance before washing.
Do not cut directly on a lamp or use excessive heat. If application or curing instructions are missing, contact NUVEREN before peeling the liner.
Good questions. Clear answers.
Before you choose.
Does Front + rear lights include the large panel with TESLA lettering?
No. The combined option includes the two light-film sets. The wide center panel requires the separate Rear trim panel only option. Add that as a second item if you want both.
Do I need to choose a year, drivetrain or individual trim?
No extra vehicle option is needed. Every variant on this page uses the listed 2026 Juniper fitment. Launch Series, Long Range / Premium and Performance with original light-bar assemblies share the supported pattern. Model Y Standard and Model YL are excluded.
Will smoked film preserve the same light output?
No unchanged-output promise is made. Tint can reduce transmitted light, and we do not publish an unverified VLT or night-driving claim. Choose Clear to retain an untinted appearance; tinted lamp options are offered for show or off-road use.
Will photochromic film turn completely clear in the dark?
That is not guaranteed. The supplier lists a light-responsive finish but does not provide a verified tint range, response time or night-time transmission figure. Treat it as a changing styling finish, not an automatic lighting-safety feature.
Are tools, spare films or replacement lamps included?
This listing is for the precut films in your selected coverage and finish. Tools, spare pieces and lamp assemblies are not advertised as included.
What if my car has aftermarket lights or a different model year?
The listed fitment applies to the original 2026 Juniper light assemblies. For a changed assembly or a model year not listed, contact NUVEREN with your vehicle details before ordering so we can check the pattern.
Where can I find delivery and returns information?
See our current shipping policy and returns policy. Check fitment and coverage before removing a liner or installing the film.
Choose your coverage.
Make it your finish.
Explore more vehicle-specific light films and Model Y Juniper protection.
NUVEREN aftermarket accessory. Tesla model names identify compatibility; this product is not manufactured or endorsed by Tesla. Studio images are illustrative product renders based on supplier references.
Precio regular
$44.99 USD
Precio de venta
$44.99 USD
Precio regular
Precio unitario
Ahorre
2026 Tesla Model Y Juniper TPU Headlight & Taillight Film